Newsflash

The drive for lightweight materials to reduce overall cost and environmental impact for automotive manufacturers is nothing new.  Fuel economy attracts car buyers too. That is how majority of steel parts have been replaced in F-150 pickup truck by aluminum parts, reducing overall weight over 500 pounds. Then there are alloys, carbon fiber and plastics composites.The ambition for lighter vehicles did not stop with alloys (magnesium, aluminum), and/or composites (glass, carbon fibers).  Recently, Japanese researchers at Kyoto University led by Professor Hiroaki Yano along with its industrial partners (Denso Corporation and Daikyo-Nishikawa Corporation) reported that they were developing cellulose nanofiber based materials for automotive as well as aircraft parts to reduce environmental footprint while increasing product performance.Inevitable questions are: 1) would these materials be cost effective? 2) What would be the service life of these products compared to the current ones? 3) How about the parts’ safety in situations like crash or fire?A final question that an automaker has to ask is: what would be the pay back time to replace current production line (machinery) to CNF based plastics line?Reference: https://www.japantimes.co.jp/news/2017/08/15/business/researchers-japan-use-wood-make-cellulose-nanofiber-auto-parts-stronger-lighter-metal/#.WbAIKeTXuUm...
We know polycarbonates mostly from its use in plastics water bottles, safety goggles, smart phones, structural panels (glazing) and the list goes on.  A quick look at Wikipedia gives a spectrum of applications.However, polycarbonates have its weaknesses along with the BPA (bis-phenol) controversy. Polymers such as polysulfates and polysulfonates have similar if not better mechanical properties than polycarbonates.  The issue has been how reliably scale-up the manufacturing process of polysulfates and polysulfonates?“Click chemistry” is a concept in organic chemistry by which highly reactive reactions provide high yielding products and require little to no purification.  The concept was introduced by Nobel Prize winner Professor K. Barry Sharpless in 2001.A recent work published in Nature Chemistry, by a team of researchers from The Scripps Research Institute (La Jolla), Lawrence Berkley National Laboratory (Berkley), California and Shanghai Institute of Organic Chemistry & Soochow University, China claimed that reduced cost of catalyst, product purity, and by-product recycling make their work ready to move from laboratory research to industrial process.Chemists are at work indeed!References:https://en.wikipedia.org/wiki/PolycarbonateK. Barry Sharpless et al; Nature Chemistry, 2017 DOI: 10.1038/nchem.2796...
In a recent The Atlantic interview Bill Gates made a wish on an energy miracle, “Here’s a source of energy that is cheaper than your coal plants, and by the way, from a global-pollution and local-pollution point of view, it’s also better”.  The race is on to find that source. One such energy source is solar energy. We all know that solar energy can be harnessed to generate thermal energy or electrical energy for use in the residential and/or in the commercial applications.  Any material that can store Solar Thermal Energy is called Solar Thermal Fuel (STF).  The quest to harvest solar energy, store the same and use it when needed has been the focus of research in industry and academia alike. For the first time, Professor Grossman’s team at MIT, Cambridge (USA) has come up with a new approach which uses polymer Solar Thermal Fuel (STF) storage platform utilizing STF in its solid-state.  According to the published article, researchers stated, “Closed cycle systems offer an opportunity for solar energy harvesting and storage all within the same material. This approach enables uniform films capable of appreciable heat storage of up to 30 Wh kg?1 and that can withstand temperature of up to 180 °C.”How the STF process works?Certain molecules (chemicals) can have 2 different stable structural forms. These structures are called conformations.  When original molecular conformation is exposed to sunlight, the molecule gets charged and the original conformation changes to the other and stay in that charged conformation for a long period.  The charged molecule snaps back to their original shape (conformation), when triggered by a very specific temperature or other stimulus generating heat in the process. Currently, developed polymeric film can release heat about 10 degree C above the surrounding temperature. Film property improvements are underway. German auto company BMW, has sponsored this research. Where the potential application lies - your guess is as good as mine.References:The Atlantic, p 56, November 2015Zhitomirsky, D., Cho, E. and Grossman, J. C. (2015), Solid-State Solar Thermal Fuels for Heat Release Applications. Adv. Energy Mater., 1502006. doi:10.1002/aenm.201502006...
In a recent The Atlantic interview Bill Gates made a wish on an energy miracle, “Here’s a source of energy that is cheaper than your coal plants, and by the way, from a global-pollution and local-pollution point of view, it’s also better”.  The race is on to find that source. One such energy source is solar energy. We all know that solar energy can be harnessed to generate thermal energy or electrical energy for use in the residential and/or in the commercial applications.  Any material that can store Solar Thermal Energy is called Solar Thermal Fuel (STF).  The quest to harvest solar energy, store the same and use it when needed has been the focus of research in industry and academia alike. For the first time, Professor Grossman’s team at MIT, Cambridge (USA) has come up with a new approach which uses polymer Solar Thermal Fuel (STF) storage platform utilizing STF in its solid-state.  According to the published article, researchers stated, “Closed cycle systems offer an opportunity for solar energy harvesting and storage all within the same material. This approach enables uniform films capable of appreciable heat storage of up to 30 Wh kg?1 and that can withstand temperature of up to 180 °C.”How the STF process works?Certain molecules (chemicals) can have 2 different stable structural forms. These structures are called conformations.  When original molecular conformation is exposed to sunlight, the molecule gets charged and the original conformation changes to the other and stay in that charged conformation for a long period.  The charged molecule snaps back to their original shape (conformation), when triggered by a very specific temperature or other stimulus generating heat in the process. Currently, developed polymeric film can release heat about 10 degree C above the surrounding temperature. Film property improvements are underway. German auto company BMW, has sponsored this research. Where the potential application lies - your guess is as good as mine.References:The Atlantic, p 56, November 2015Zhitomirsky, D., Cho, E. and Grossman, J. C. (2015), Solid-State Solar Thermal Fuels for Heat Release Applications. Adv. Energy Mater., 1502006. doi:10.1002/aenm.201502006...
Reliable and high performance lithium ion batteries commonly known as LIBS are highly sought after product by industries. We all have heard stories about laptops, electric vehicles, airplanes catching fires due to LIBS. Underlying problem is the battery overheating. Preventing batteries from overheating is crucial to the public safety.  Now a team of researchers at Stanford University designed a thermo-responsive (heat sensitive) plastic composite film made from polyethylene and spiky nickel microparticles coated with graphene which shuts down the battery if the temperature is too high.         In a recently published work led by Yi Cui and Zhenan Bao of Stanford University, USA concluded “Safe batteries with this thermoresponsive polymer switching (TRPS) materials show excellent battery performance at normal temperature and shut down rapidly under abnormal conditions, such as overheating and shorting.” How practical this design approach is? Time will tell.References: Y. Cui, Z. Bao et al Nature Energy vol.1, Article number: 15009 (2016); DOI: 10.1038/nenergy.2015.9Chemical & Engineering News, Page 7, January 18, 2016...
In aviation industry, the focus is how to improve fuel safety and handling. Mike Jaffe and Sahitya Allam gave their perspective on safer fuels by integrating polymer theory into design (Science, 350, No. 6256, p. 32, 2015).Mist (generated from the fuel) is much more flammable than the liquid and that is why anti-misting kerosene interferes with mist formation when a low percentage of a polymer is added into it.  The problem however, is that the polymer chain undergoes scission during handling and can’t assist in suppressing mist formation. The answer comes from a recent paper published in the Journal Science by Professor Julia Kornfield and her cross-functional team at Caltech, Pasadena, USA. The group designed a megasupramolecules having polycyclooctadiene backbones and acid or amine end groups (telechelic polymer) which is short enough to resist hydrodynamic chain scission while protecting covalent bonds through reversible linkages. Yes, polymers can be designed to suit our societal needs including aviation fuel safety.Reference: M-H Wei, B. Li, R.L. Ameri David, S.C. Jones, V. Sarohia, J.A. Schmitigal and J.A. Kornfield; Science, 350, (6256), pp. 72-75 (2015)...
At the TED conference, Carbon3D, a Vancouver based company touted a radical 3D printing technology and named it CLIP or Continuous Liquid Interface Product. CLIP grows parts instead of printing them layer by layer. It harnesses light and oxygen to continuously grow objects from a pool of resin.  The result: make commercial quality parts at game-changing speed.  CLIP is 25 to 100 times faster than traditional 3D printing technique.  To make the point, Carbon3D web site provides a head-to-head comparison of CLIP to Polyjet, SLS and SLA.[Press release: March 16, 2015, Vancouver, Canada.  www.carbon3D.com]...
Self-healing plastics has been around for a while. Applications include self-healing medical implants, self-repairing materials for use in airplanes and spacecrafts. Even scientists have made polymeric materials that can repair itself multiple times. A recent report in Science describes a significant advance in self-healing plastics. The authors describe a product that mimics how blood can clot to heal a wound. When the plastic is damaged a pair of pre-polymers in channels combines and rapidly forms a gel, which then hardens over 3 hours.The authors demonstrated that holes up to 8 millimeters wide can be repaired. The repaired parts can absorb 62% of the total energy absorbed by undamaged parts.  Science never stops.Reference:S. R. White, J. S. Moore, N. R. Sottos, B. P. Krull, W. A. Santa Cruz, R. C. R. Gergely; Science, Restoration of Large Damage Volumes in Polymers, Vol. 344 no. 6184 pp. 620-623; (9 May 2014). ...
Knowingly or unknowingly, flexible electronics has become a part of our daily life.  Transparent conductive films (TCFs) are used in mobile phones, tablets, laptops and displays.  Currently, Indium Tin Oxide or commonly known as ITO is the material of choice.  But use of ITO has some major disadvantages and these are brittleness, higher conductivity at greater transparency, and supply of Indium.  This is where non-ITO materials come into play. Based in St. Paul, Minnesota (USA), Cima NaoTech’s uses its SANTETM nanoparticle technology, a silver nanoparticle conductive coating which self-assembles into a random mesh like network when coated onto a flexible substrate such as PET and PC.  According to a recent press release, the company stated SANTETM nanoparticle technology enabled transparent conductors in a multitude markets from large format multi-touch displays to capacitive sensors, transparent and mouldable EMI shielding, transparent heaters, antennas, OLED lighting, electrochromic and other flexible applications.  Cima NanoTech is working with Silicon Integrated Systems Corp. (SIS) of Taiwan and using its highly conductive SANTE FS200TM touch films to develop large format touch screens.References: Press release, San Diego, June 03, 2014; www.cimananotech.com ; http://www.cimananotech.com/sante-technology ; http://www.sis.com/...
In an article appeared today (January 29, 2014) in The Guardian newspaper, Stuart Dredge wrote, “From jet parts to unborn babies, icebergs to crime scenes, dolls to houses: how new technology is shaking up making things”1. Mr. Dredge was speaking about 3D printing technology.  The heart of this technology is the 3D printer itself. Stratasys, a company headquartered in Minneapolis, USA is the manufacturer of 3D printers.  It recently announced the launch of Color Multi-material 3D Printer, the first and only 3D printer to combine colors with multi-material 3D printing.  According to the press release2, by using cyan, magenta, and yellow, multi-material objects can be printed in hundreds of colors.  The technology is based on proven Connex technology.  While the base materials are plastics and elastomers, they can be combined and treated to make finished products of wide ranging flexibility and rigidity, transparency and opacity.  Designers, engineers and manufacturers can create models, mold, and parts that match the characteristics of the finished production part. This includes achieving excellent mechanical properties.  According to the manufacturer, print job in the newly revealed printer can run with about 30 kg of resin per cycle and prints as fine as 16 micron layers for models.  No wonder why some call the new Color Multi-material 3D printer a groundbreaking stuff.References: 1. www.theguardian.com.technology/2014/jan/29/3d-printing-limbs-cars-selfies (January 29, 2014)2. http://investors.stratasys.com/releasedetail.cfm?ReleaseID=821134 (August 3, 2014)...
Instead of stitches or skin staples, doctors use skin glue to close wounds. The glue joinsthe edges of a wound together while the wounds heal underneath. Most of the timeskin glue is used for simple cuts or wounds. According to the paper published inScience Translational Medicine, there are no clinically approved surgical glues thatare non-toxic, bind strongly to tissue, and work well in wet and highly dynamicenvironments within the body. This is the reason why this published work is promisingwhere infants born with heart defects would benefit tremendously. Researchers at the Brigham and Women’s hospital in Boston have engineered ‘bio-inspired’ gluethat can bind strongly to tissues on demand, and work well in the presence ofactively contracting tissues and blood flow. The authors of the paper show howthe glue can effectively be used to repair defects of the heart and blood vessels during minimally invasive procedures. [References: P. J. del Nido et al; Sci. Transl. Med., DOI: 10.1126/scitranslmed.3006557; See also, www.geckobiomedical.com/news/gecko-biomedicals-co-founde.html]...
Stability of organic electronics in water is a major research challenge. For this reason,organic electronics has yet to see any sensing application in aqueous environment.However, as understanding of underlying mechanism of stability aspect is becomingclearer, new developmental efforts to make water compatible organic polymer devicesare taking place. Recently, Professor Zhenan Bao’s group in the department of chemical engineering at Stanforduniversity revealed in a paper published in the journal of Nature Communications thatsolution- processable organic polymer could be stable under both in freshwater andin seawater. Developed organic field-effect transistor sensor is able to detect mercury ionsin the marine environment (high salt environment). Researchers believe that the work hasthe potential to develop inexpensive, ink-jet printed, and large-scale environmental monitoring devices. [References: O. Knopfmacher, M.L. Hammock, A.L. Appleton, G. Schwartz, J. Mei, T. Lei, J. Pei,and Z. Bao; Nature Communications, 5, 2954, January 6, 2014; DOI: 10.1038/ncomms3954]...
Insulin, the wonder medicine for diabetes was discovered about a century ago.Since insulin does not get into the blood stream easily, diabetes patients oftenhave injected themselves with insulin. Now a group of scientists led by Dr. Sanyog Jainat the Center for Pharmaceutical Nanotechnology of National Institute of Pharmaceutical Education and Research in Punjab, India has designed a polymerbased package for oral insulin administration. The package design addresses two major obstacles, 1) digestive enzymes must notdegrade insulin prior to its action and 2) the insulin gets into the blood stream.The package contained folic acid functionalized insulin loaded in liposomes.To protect the liposomes (lipids or fat molecules) they were alternately coated withnegatively charged polyacrylic acid (PAA), and positively charged poly allylamine hydrochloride. Studies were conducted to compare the efficacy of bothdelivery systems: designed polyelectrolyte based insulin and standard insulinsolution. Effects of oral administration lasted longer than that of injectedinsulin, authors reported in a recent article in Biomacromolecules. [Reference: A.K. Agarwal, H. Harde, K. Thanki, and S. Jain; Biomacrmolecules, Nov. 27, 2013;DOI: 10.1021/bm401580k]...
Research in the area of stretchable electronics is heating up!  Thanks to polymers. Led by Professor George M. Whitesides of Harvard University (USA), a team of researchers have demonstrated in a recently published paper in Science that ionic conductors can be used in devices requiring voltages and frequencies much higher than commonly associated with devices using ionic conductors.  The team showed for the first time that electrical charges carried by ions and not electrons, can be utilized in fast-moving, high voltage devices.As a proof of concept, the authors of the study built a transparent loudspeaker that produces sound across the full audible range i.e., 20 Hz to 20 kHz.  Components [such as VHB 4910 tape (acrylic tape with PE liner), polyacrylamide hydrogel containing NaCl electrolyte] used for the high speed, transparent actuators are described in the paper.Tissues and cells are soft and require stretchable conductors for biological systems. Many hydrogels are biocompatible which makes this work particularly an important one. The design of gel-based ionic conductors is highly stretchable, completely transparent and offer new opportunities for designers of soft machines.   [Reference: C.Keplinger, J-Y. Sun, C.C. Foo, P. Rothemund, G.M. Whitesides, and Z. Suo; Science, 341 (6149), pp. 984-987 (2013); DOI: 10.1126/science.1240228]...
Interweaving biological tissue with functional electronics, one can make bionic ears.  NASA has tested 3D-printed rocket engine part.  Then why not 3D print yourself?Well, Twinkind, a German start-up company is now offering enthusiasts statues of themselves for display.  How this works?  A full body scanner takes an image of the customer’s body, transfers the file to the printer after which 3D printer laser sinters a composite powder layer by layer into the customer image.Can we dare to say that Madame Tussauds wax figure of Voltaire can now be 3D printed in polymers soon!  [Reference: www.twinkind.com ]...
Polymer membranes have become a leading contender in numerous separation processes.  Be it in gas (air, hydrogen etc.) or be it in water purifications (salinated water, waste water etc.).  Not only polymer membrane technology helps reducing the environmental impact but also it is cost-effective.  Fracking in shell gas is one of many examples. New advances in drilling technology (such as horizontal drilling) have led to new hydraulic fractures called fracking.  Hydraulic fracturing requires about 2.5 to 5 million gallons of water per well.  Water management and its disposal are major costs for producers.One major challenge, however, of the membrane technology is the fouling (damage caused by contaminants) mitigation.  This has been recently studied by a group of researchers from University of Texas at Austin led by Professor Benny Freeman to address efficiency and reuse of water for fracking in shale gas plays.Researchers modified polydopamine coated UF (ultrafiltration) module by grafting polyethylene glycol brushes onto it.  The result is more hydrophilic surfaces which in turn improved cleaning efficiency relative to unmodified modules. The coating improves the membrane life, and can easily be applied to membrane surface by rinsing it through the recycling system.[References: D.J. Miller, X. Huang, H. Li, S. Kasemset, A. Lee, D. Agnihotri, T. Hayes, D.R. Paul, and B. Freeman; J. Membrane Sci., 437, pp. 265-275 (2013); Also see www.advancedhydro.net ]...
Flexible electronics can change the way we use electronic devices.  It is a term used for assembling electronic circuits by mounting electronic devices on a flexible plastic. A recent review article captured the advancement of CNT and graphene based flexible thin film transistors from material preparation, device fabrication to transistor performance control compared to traditional rigid silicon1. Silicon is used almost exclusively in electronic devices.Now Prof. Ali Javey led a team at the University of California, Berkley to develop a printing process to make nanotube transistors at room temperature with gravure printer.  The plastics used is polyethylene terephthalate (PET). The device exhibited excellent performance with mobility and on/off current ratio of up to ~9 cm2/ (V s) and 105 respectively.  Also, maximum bendability is observed.  The paper authors conclude that this high-throughput printing process serves as enabling nanomanufacturing scheme for range of large-area electronic applications based on nanotube networks2. References:1. D-M. Sun, C. Liu, W-C. Ren and H-M Cheng; Small, DOI: 10.1002/smll.2012031542. P.H. Lau, K. Takei, C. Wang, Y. Zu, J. Kim, Z. Yu, T. Takahashi, G. Cho, and Ali Javey; Nano Letters, 13 (8), pp. 3864-3869 (2013); DOI. 10.1021/nl401934a...
Drinking coffee from paper cups are as common as drinking water from plastics bottle. The issue however, is recycling of disposable cups. The disposable cups are made up of 90-95% of high strength paper (fibers) with a 5% thin coating of plastic (PE).To address the recycling issue, James Cropper Speciality Papers of UK have developed a process which involves softening the cup waste, and separating the plastic coating from the fiber.  After skimming off the plastic, remains are pulverised and recycled, leaving water and pulp behind.  According to the company news release, the high grade pulp is reused in luxury papers and packaging materials.An innovative approach to address a common problem.[Reference: www.jamescropper.com/news ]...
A search for an alternative to rigid silicon wafers gave birth to the area of flexible or bendable electronics. Research has been intense for the past few years in the area flexible electronics as it opens up multitude of new applications. Polymers play an important role to exciting field of flexible electronics.In a recent research report, a team of scientist led by Prof. Ali Javey of University of California, Berkeley (USA)  has shown for the first time user-interactive electronic skin or e-skin can conformally wrap irregular surfaces and spatially map and quantify various stimuli through a built-in active matrix OLED display.  Three electronic components namely thin film transistor (uniform carbon nanotube based), pressure sensor, and OLED arrays (red, green, and blue) are integrated over a plastic substrate.  Spin coated and cured polyimide on a silicon wafer is used as the flexible substrate.  Details are in the paper.This work essentially provides a technology platform where integration of several components (organic and inorganic) can be done at a system level on plastic substrates. According to the paper, this e-skin technology could find applications in interactive input/control devices, smart wallpapers, robotics, and medical/health monitoring devices.    [Ref: C. Wang, D. Hwang, Z. Yu, K. Takei, J. Park, T. Chen, B. Ma, and Ali Javey; Nature Materials, Published online July 21, 2013; DOI: 10.1038/NMAT3711]...
Recent buzz in the technology world is 3D printing.  Researchers to designers are creating new products everyday using 3D printing technology.  Even eBay has unveiled its services to those looking to make their own creations using 3D printing App.Since ages composites have played a crucial role in our society. Inspired by natural (biological) composites such as bone or nacreous abalone shell, researchers from MIT (USA) and Stratasys have developed composite materials that have fracture behaviour similar to bones.  Using computer model with soft and stiff polymers, the team has come up with a specific topological arrangements (hierarchical structures) of polymer phases to boost the mechanical behaviour in the composites.Interestingly, the team has been able to manufacture (thanks to 3D printing) a composite material that is more than 20 times larger than its strongest constituent.  The referenced paper showed that one can use computer model to design composite materials of their choice, tailor the fracture pattern and then use 3D printing technology to manufacture the composites.[Ref: L.S. Dimas, G.H. Bratzel, I. Eylon, and M.J. Buehler; Advanced Functional Materials, Published online June 17, 2013; DOI: 10.1002/adfm.201300215]...

I have been retired from active business in the Plastics Industry for 5 years and now feel that this is a good time to look back and assess my career, to see if my course of action can be of any help to anyone else in the Industry

terry browitt  I have been very fortunate, but credit this fortune to many people who were my mentors through life, to being prepared to take risks and to being in the right place at the right time.

I was born and educated in England, before I immigrated to Canada where I have spent my whole working life. The Plastics Industry and Societies in Canada and in the United States provided opportunities that exposed me to great challenges and opportunity. The early 1960s was a great time to start working in plastics, since this was near the birth of the industry; new materials were being discovered every day and new applications for these were constantly being developed. Everywhere people were discovering exciting properties of plastic raw materials and realizing their potential in industries such as packaging, toys, automotive, building and sports. It is hard now to think of any of the industries using anything else but plastics in many applications. Soft drinks came in glass bottles, bread in wax coated paper and automobiles weighed considerably more than they do today and barely achieved 7 miles per gallon. Clay pipe was used for irrigation and ductile iron to carry water. The conversion to plastic materials made great changes to people's lives. Formulators and compounders met fascinating challenges as they worked furiously to come up with stronger, more suitable, less expensive alternatives to conventional materials.

One of my early mentors was the Physics teacher Mr. Gould at my grammar school. He worked hard to convince me that a university education was within my grasp, something completely unknown at that time to my family.  I was having a hard time deciding what to do with my life. I enjoyed sciences but was not sure of which branch appealed most. This is when Mr. Gould suggested physics, which would give a good basis in science, logical reasoning and problem solving. I followed this advice and it provided a good solid basis for a career in industry.

When I arrived in Canada my entry into the plastics industry was serendipitous. Northern Electric, the company who hired me in England had intended that I start in the Electrical Laboratory but the head of the department was absent that day and the manager of the Materials department said he really needed someone so I became a Plastics Technologist in the Materials Department. Interestingly enough, later that week I met Louise who would become my wife and still is after over 51 years. I was fortunate to be surrounded by several very competent people such as Marta Farrago, Alan Wright and Jim Campbell all working at a time when business was good and there were always funds for both training and for research and development. It was a wonderful environment to work in that provided a very good education in the basics of plastic raw materials.

During the 1960s the environment issues became more important and I was again fortunate to be a partner with Charlie Knechtel in the founding of a recycling company, Phoenix Blending in Quebec, Canada. Again, we were continually inventing and creating. In those days plastic recycling was restricted to industrial waste product, but there was never a shortage of opportunity and all companies were grateful when they found out that material that they had to send to the garbage dump could either be recycled and reused internally or had a resale value. The science and technology has improved to the extent that today consumer waste can be sorted, and heavily contaminate plastic products can be cleaned, recycled and sometimes re-compounded to make useful and economic raw materials for a multitude of products. Again, working in this industry during its infancy was a satisfying and rewarding experience.

In my mid-thirties, like many people I yearned to have my own company and to be one hundred percent accountable to only myself. After initially considering starting a manufacturing plant, after much soul searching and consulting with friends and colleagues whom I highly respected, decided to reject this idea as my strengths were in sales, marketing and communication, I also had a passion for travel. So, I started a raw material company, Terinex International Limited in 1976, planning to consult with small to medium size injection molders, extrusion companies and converters to help them solve their plastic raw material issues and problems. There was no shortage of companies who needed help but none were prepared to pay for this help in the form of consulting fees. So again, on the advice of trusted colleagues I converted to being a raw material broker and distribution company and the business steadily grew from there and is still running profitably forty years later well after I retired.

One of the hardest things about running your own business is having no one to talk to. Certainly, you developed strong, meaningful and reliable relationships with your customers, suppliers and even your competition, but at times you need an impartial opinion or more in-depth analysis. It was at this time I turned to Professional and Business Societies and the Chamber of Commerce for help. I had been an active member of the Society of Plastics Engineers (SPE) for a number of years, but I turned to the local Chamber of Commerce during early ‘80s and became very involved. Exposure to committee work with the Chamber broadened my education and gave me a chance to see how larger companies operate and how government functions, knowledge which was invaluable as my company grew and developed. As this growth took place it was essential to meet and talk with as many people as possible. At this time, the Canadian Plastics Industry Association (CPIA) became important to me and I was honored to be offered a place on their Board of Directors. This provided me with a great opportunity to meet many of the leaders of the Canadian Plastics Industry including Pierre Dubois, the Director General, Tom Torokvei of IPEX, Paul Cohen of W Ralston and Paul Clark of Nova Chemicals.  What I learnt from working with them was not only invaluable but also provided the great pleasure of meeting many competent, traveled and interesting people.          
Our company continued to grow and more and more opportunities were being presented in the United States and other parts of the world. I became active with SPE again. I served in governance and was charged with increasing SPE membership worldwide. It provided a wonderful opportunity to travel, meet people on all five continents, while at the same time contributing to the growth of SPE.

I feel I had a wonderful career working in the Plastics Industry, one that gave me a feeling of accomplishment, financial security and wellbeing. This industry provided with a chance to be in a dynamic and rapidly growing business and gain a multitude of friends. I was very fortunate and credit much of this fortune to the fact I was very involved and committed to technical and professional societies and volunteer organization.

It is definitely true that the more you put into an organization the more you will benefit.

Terence J. Browitt

Terence J. Browitt is retired from Terinex International Ltd, a sales and distribution company specializing in raw material and additives for the plastic processing industry, a company he founded in 1976. Terinex is based in St Lazare, Quebec and had offices in Toronto and Boston.

Mr. Browitt has served as Treasurer on the Board of The Canadian Plastics Industry Association (CPIA) and on the Board of The Canadian Plastics Pioneers (CPP). In the United States he is a member of the Board of the Plastic Academy. He is active in The Society of Plastic Engineers (SPE) since 1965. Mr. Browitt served as the Society’s President in 2001-2002 and was made a Distinguished Service Member in 2002. He was an active member of the Montreal West Island Community and Chamber of Commerce where he served as President in 1991. He is founding president of the West Island Tourism Office, past member of the local YMCA Capital Campaign and of the organizing committee for the fundraising efforts of the local Women’s Shelter.

Mr. Browitt has been awarded numerous awards throughout his career. He was inducted into the Plastic Pioneers of America in 2001. In May 2003 he was presented with a CPIA Canplast award and in 1997 and 2015  he was awarded the SPE Quebec Section Man of the Year Award. In 1996 the West Island community presented him with an Outstanding Achievement award.In March 2015 he was inducted into the Plastics Hall of Fame at a ceremony in Orlando Florida.

Since his retirement he has become more active in the local community, serving as Secretary of the Whitlock Curling Club and establishing the Ramblers Association, organizing outdoor activities in the Vaudreuil-Soulange area.  He also has been a member of the Board of the Hudson Village Theatre and serves on the Board of Nova Hudson, a community based organization offering health care services.   He is also active in organizing several groups of Bridge players.
 
Born in England and a graduate of London University, he emigrated to Canada in 1962.  He and his wife, Louise, reside in Hudson Quebec; they have two children and four grandchildren.